2015 Intl 4300 EC w/ Cummins ISB 6.7L, 260HP @ 2,300 rpm, 660 lb-ft @ 1,600 rpm, Allison RDS-2200 6 Speed Auto, Air Brake package, Air Dryer Heater, Exhaust Brake, Front Axle: Dana-Spicer I Beam 8,000lb w/ Shock Absorbers, 8,00lb front suspension. Rear Axle: Dana Spicer 17,500lb, 20,000lb Air Ride Suspension, with dump valve- Switch in cab. , 4.88 Rear Axle Ratio, Chrome Grille, Single Air Ride Driver Seat, Single Passenger Seat, Rear Bench, Idle Up, Cruise Control, Tilt-Wheel, AM/FM/CD/MP3 w/ Bluetooth, Air Horn, Engine Block Heater, 50 Gal Alum Fuel Tank, 7 Gal DEF Tank, Power Windows, Power Door Locks, A/C, 245/70R22.5 Tires w/ 22.5 Aluminum Wheels, chrome grille. Overhead storage pockets with netting. Over-Temp gauge. Factory PTO Switch. Air Horn. 6 upffiter Switches. 25,500 GVWR
Inspection notes Aftermarket Air Ride Driver seat upgrade. Brakes front 80%. Rear 80%. Front Tires 12/32 12/32 Rear 07/32 06/32 06/32 06/32. Driver-side windshield has a bullseye in the windshield.
There are two interior pieces that have broken off. There is a piece that goes on the driver-side windshield A-pillar. There is a piece that goes on the driver-side door that goes around the door handle. Unable to reattach either piece.
Passenger door auto lock is in-op.
Passenger side lower step had been hit and bent back and down.
Both tool boxes have been damaged. All doors are held closed with deadbolts. Both L arm mounts have been bent. Both toolbox rear arm mounts have been bent. The passenger side tool box has been high centered. Driver side toolbox center post is loose at the bottom.
Right side control hood has an in-op light.
Bent hook on the left side grid.
Aftermarket Bumper- NOT OEM Chrome
Vulcan LCG 12 21.5' Steel LCG (Low Center of Gravity) Carrier w/ Wheel Lift, 3/16 Deck Plate, 3x2 Corten Tube Crossmembers on 8 inch Centers, (4) Rear Chain Locks, (2) Front Chain Locks, (6) Floor Plate Chain Locks (3 per side), 8,000lb Low Mount Winch, 3/8" x 50' Winch Cable, Illuminated Dual Controls, FMVSS 108 Lamp Group Shock Mounted Lighted, Direct Mount Pump, Cable Roller Guide w/ Tensioner, Winch Free Spool Extension, Back Up Alarm, (2) Safety Chains, Mechanical Anti-tilt, Black Body Paint, 102" Wide Body, Inboard Tilt Cylinders, Floor Level Roll Formed w/ Punched Stake Pockets, 4,000lb Wheel Lift w/ Releasable L Arms, Fully Hydraulic Wheel Lift, (2) Safety Straps & Ratchets, (2) Rear Safety Chains, Body Lock w/ Nylatron Toller Bearings, & 12,000lb Deck Load Rating. Body# 215L12S11387HC14
SST Body option
9,000lb Warn planetary winch option
Air Free Release for Winch pass Side
Air Free release station driver side
Roller tip Option - Tail
Work lights at Winch
LED Work lights at Wheelift
Air Coupler at Pass side control station
LED light bar
Miller Cab protector
Stainless DPF Step cover pass side
Oval LED Turn signals
96" Steel tool boxes with Barn doors with Top tray storage
Shelf driver side tool box
Wheel lift Straps
Front tie downs
Front Jumpstart box 500AMP
Rear Center cap buckets
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate