MV

All Carriers

Specifications

• Dot: Yes
• Driver Position: Left Hand Drive
• Dual Breathers: No
• Dual Exhuast: No
• Engine Brake: No
• Engine Size: 6.7
• EnginesizeUnit: Engine Liter
• Exhaust Brake: Yes
• Gross Vehicle Weight: 25500
• Gross Vehicle Weight Rating: Class 6
• GrossvehicleweightUnit: Pound
• Horsepower: 260
• HorsepowerUnit: Horsepower
• Hours Meter Inaccurate: 0
• Mileage: 211
• MileageUnit: Mile
• Overhaul: No
• Transmanufacturer: ALLISON
• Transmission: Automatic
• Turbo: Yes

General Description & Dealer Notes

2026 International Model MV regular cab. Cummins ISB 6.7L, 260HP @ 2,300 rpm, 660 lb-ft @ 1,600 rpm, Allison RDS-2200 6 Speed Auto, Air Brakes, Air Dryer Heater, Exhaust Brake, Front Axle: Dana-Spicer I-Beam 8,000lb w/ Shock Absorbers, Rear Axle: Dana-Spicer 19,000lb rear axle. , 20,000lb Air Ride Suspension, 4.88 Rear Axle Ratio, Chrome Bumper, black Grille, Air Ride Driver Seat,& Two man Passenger Seat, - bench seat. Idle Up, Cruise Control, Tilt-Wheel, AM/FM/CD/MP3 w/ Bluetooth, Air Horn, Engine Block Heater, Dual 40-50 Gal Alum Fuel Tanks, 7 Gal DEF Tank, Power Windows, Power Door Locks, Power heated Mirrors. A/C, 255/70R22.5 Tires w/ 22.5 Alum Wheels, Cup holders.Visor 25,500 GVWR,

Extended Warranties.- Engine Warranty: 5 yr / 300k miles PPI & after treatment, and Tranny Warranty: 7 yr / Unlimited Miles.


Century Steel LCG (Low Center of Gravity) Carrier w/ Wheel Lift, 3/16 Deck Plate, 3x2 Corten Tube Crossmembers on 8 inch Centers, (4) Rear Chain Locks, (2) Front Chain Locks, (6) Floor Plate Chain Locks (3 per side), 8,000lb Worm Gear Winch, 3/8" x 50' Winch Cable, Illuminated Dual Controls, FMVSS 108 Lamp Group Shock Mounted Lighted, Direct Mount Pump, Cable Roller Guide w/ Tensioner, Winch Free Spool Extension, Back-Up Alarm, (2) Safety Chains, Mechanical Anti-tilt, Black Body Paint, 102" Wide Body, Inboard Tilt Cylinders, Floor Level Roll Formed w/ Punched Stake Pockets, 4,000lb Wheel Lift w/ Releasable L Arms, Fully Hydraulic Wheel Lift, (2) Safety Straps & Ratchets, (2) Rear Safety Chains, Body Lock w/ Nylatron Toller Bearings, & 12,000lb Deck Load Rating. Body SN# ST12L2F253035


Conventional Wheel-Lift (10-16)
Floor Level Roll Formed with Punched Stake Pockets (Steel)
Marker Lights - Pee Wee Lights
Slide In Steel Tube L-Arms (10-16)
Standard Approach Plate (Steel)
Standard Bed (Steel)
0- Lights on Pylon
102" Wide (12-40, Steel)
11 Chain Lock Package - Deck Centered (steel)
21.5’ (10-16)
3/16” Deck Plate (Steel)
5-Light Configuration (10/12 Series)
6-Spool Capable
8K Ramsey Worm Gear
Chain Baskets
Frame Mtd. Pylon - 5" Base (Add 6” to CA - 10-16)
Passenger Side Winch Clutch Release - Manual


Accessories
Muncie Hot Shift PTO (Allison 1000/2000 or Aisin)


Installation
10 - 16 Car Carrier
Frame Mounted Cab Protector
Hot Shift PTO - LD, CC, HD
In-Dash Switch Panel
Light Bar (LD/CC)
Misc. Labor
Switch Panel Harness (Required for all LD Installs)
Toolbox (each, CC)
Work Lights (Pair)


Paint
Bed - Factory Black (10-40, Steel)


DAA
B/M: Toolbox Bracket-Side mount - powder coated black ( Pair)
HYD: Ball Valve (Shut off for Hydraulic Tank) 1-1/4" or 1"
LB: New Maxxima light bar 60" LED Tow Bar, Amber w/Work Lights, Stop/Tail/Turn, & Traffic Director
LIT: PTO Light, LED
LIT: Worklights, 4" Round, LED HD, Pair, Mounted at Winch, 1200 Lumens
LIT: Worklights, Rectangular, LED HD, Pair, for Lower Worklight (Required on LCG)
SH: Shop Supplies
TB: Toolbox, Aluminum, 80", Driver-Side, SS Double-Door, Integrated Top Tray, Equipment Brackets
TB: Toolbox, Aluminum, 80", Passenger-Side, SS Double-Door, Integrated Top Tray, Equipment Brackets
TB: Tray, 18" Z-Bracket, FSW, Aluminum, SS Logo Plates
WH: Hub Covers, Front, Stainless Steel, Pair
WH: Hub Covers, Rear, 10-Lug with 8.25" Axle, Pair
WH: Lug Nut Cover, 33 mm Front, SS, 2-9/16"
WH: Lug Nut Cover, 33 mm Rear, SS, 2-1/16"




Notes
Basic build-

Freight - is for the Body from PA -Woodburn


No trade pricing,