2026 International Model MV Regularcab. Cummins ISB 6.7L, 300HP @ 2,300 rpm, 660 lb-ft @ 1,600 rpm, Allison RDS-2200 6 Speed Auto, Air Brakes, Air Dryer Heater, Exhaust Brake, Front Axle: Dana-Spicer I-Beam 8,000lb w/ Shock Absorbers, Rear Axle: Dana-Spicer 19,000lb rear differential lock. , 20,000lb Air Ride Suspension, 4.88 Rear Axle Ratio, Chrome Bumper, black Grille, Air Ride Driver Seat, Two-man bench seat. Idle Up, Cruise Control, Tilt-Wheel, AM/FM/CD/MP3 w/ Bluetooth, Air Horn, Engine Block Heater, Dual 40-50 Gal Alum Fuel Tanks, 7 Gal DEF Tank, Power Windows, Power Door Locks, Power heated Mirrors. A/C, 255/70R22.5 Tires w/ 22.5 Alum Wheels, Cup holders.Visor 25,500 GVWR,
High content: Polished tanks, 300HP, Locking Differential.
Extended Warranties.- Engine Warranty: 5 yr / 300k miles PPI & after treatment, and Tranny Warranty: 7 yr / Unlimited Miles.
Chevron Steel LCG (Low Center of Gravity) Carrier w/ Wheel Lift, 3/16 Deck Plate, 3x2 Corten Tube Crossmembers on 8 inch Centers, (4) Rear Chain Locks, (2) Front Chain Locks, (6) Floor Plate Chain Locks (3 per side), 8,000lb Worm Gear Winch, 3/8" x 50' Winch Cable, Illuminated Dual Controls, FMVSS 108 Lamp Group Shock Mounted Lighted, Direct Mount Pump, Cable Roller Guide w/ Tensioner, Winch Free Spool Extension, Back-Up Alarm, (2) Safety Chains, Mechanical Anti-tilt, Black Body Paint, 102" Wide Body, Inboard Tilt Cylinders, Floor Level Roll Formed w/ Punched Stake Pockets, 4,000lb Wheel Lift w/ Releasable L Arms, Fully Hydraulic Wheel Lift, (2) Safety Straps & Ratchets, (2) Rear Safety Chains, Body Lock w/ Nylatron Toller Bearings, & 12,000lb Deck Load Rating. Body SN# ST12L2I254140
Conventional Wheel-Lift (10-16)
Floor Level Roll Formed with Punched Stake Pockets (Steel)
Standard Approach Plate (Steel)
Standard Bed (Steel)
0- Lights on Pylon
102" Wide (12-40, Steel)
17 Chain Lock Package (steel)
21.5’ (10-16)
3/16” Deck Plate (Steel)
5-Light Configuration (10/12 Series)
6-Spool Capable
8K Ramsey Worm Gear
Air Free Spool, Driver & Passenger Side - Deck Winch(10-16)
Chain Baskets
Marker Lights - 2.5" Round
Steel Tube Drop-in L-Arms (4000 Lb., 10-20, 408G2)
Accessories
9-Wire Loop Cable Option (10-40)
Muncie Hot Shift PTO (Allison 1000/2000 or Aisin)
Installation
10 - 16 Car Carrier
Axle Cover & Lugs (Single or Tandem)
Fire Extinguisher
Hot Shift PTO - LD, CC, HD
In-Dash Switch Panel
Light Bar (LD/CC)
Misc. Labor
Shock Absorber Upper Mount Relocation (CC)
Switch Panel Harness (Required for all LD Installs)
Toolbox (each, CC)
Work Lights (Pair)
Paint
Bed - Factory Black (10-40, Steel)
DAA
ACC: Air Hose, 50': (F)7092RMA-600; (W)69711; (G)RR30806
ACC: Air Inflate Kit: (F)68272; (W)68271; (G)61387
ACC: Air Protection Valve 90PSI required when adding air outlets
ACC: Broom & Handle (F)OSB77003+81251; (W)00526CRNM; (G)AME63-15/16X60 + WEI40-25238
ACC: Fire Extinguisher, 5 lb.: (F)466425; (W)B500T; (G)USA10-22
ACC: First Aid Kit: (F)ACE6060; (W)50503L; (G)20229
ACC: Lug Wrenchs, 14" Metric/20" Standard
ACC: Shovel (F)AMES1572700; (W)Shovel; (G)Ame73-1564500
ACC: Trash Can, 4-Gallon, Steel
ACC: Triangle Kit
B/M: Circuit Breaker Bracket & Dodge breaker bracket
B/M: Toolbox Brackets, No Air Fitting, Pair, GWTE
BOD: Mudflaps, 24" x 24", Pair LCG application
BOD: Pylon, Carrier, Bed-Mount, No Lights, SS Panels, Wire Harness
BOD: Quarter-Fender Kit
HYD: Ball Valve (Shut off for Hydraulic Tank) 1-1/4" or 1"
LB: Federal Allegiant 24 Head LED light bar 5 year warranty FSW Group light bar
LIT: Breaker, 80-Amp, add 1 for each Jumpstart connection
LIT: Electrical Package, International - Main Harnesses + ATC Fuse Blocks & Bracket
LIT: PTO Light, LED
LIT: Worklights, 4" Round, LED HD, Pair, Mounted at Winch, 1200 Lumens
LIT: Worklights, Rectangular, LED HD, Pair, for Lower Worklight (Required on LCG)
SH: Air Coupler Plumbed to Toolbox Arm, Passenger Side
SH: Shop Supplies
SL: Strip Light, 45", White, LED, Mounted on Cab Protector
SL: Strobes Red,Grille,M16 Super-Thin, Pair, w/Chrome Bezels, Backing Plates, Wire Harness
SL: Strobes, CK12-A Clear-Lens, LED, Pair, for Tailboard Sides, Wire Harness
TB: Tool box matting Roll Blk. * Partial Roll useage*
TB: Top Tray Aluminum 60" x 21"
TB: Tray, 18" Z-Bracket, FSW, Aluminum, SS Logo Plates
TB:Toolbox 60" x 18" Stainless Steel boxes with Stainless Door
TOW: 8-Point Tiedown, Chain/Chain
TOW: Chains, 10', 15" J-Hooks, Grade 70, Pair
TOW: Flare Case (Case Only)
TOW: Flares, 6 (F)0730(x6); (W)7703605(x6); (G)100783(x6)
TOW: Lumber, 4" x 4"s, 48" & 60"
TOW: Skate, Carrier, Single
TOW: Tiedown, Cluster, with Chain Ratchet
WH: Hub Covers, Front, Stainless Steel, Pair
WH: Hub Covers, Rear, 10-Lug with 8.25" Axle, Pair
WH: Lug Nut Cover, 30 mm, SS, 2-1/16"
WH: Lug Nut Cover, 33 mm Rear, SS, 2-1/16"
Notes